Rotary hammers Greenlee
Here you can compare the prices for rotary hammers Greenlee, get acquainted with photos and technical characteristics (for example Nominal input power, Vibration chiseling, Vibration chiselling uncertainty, Number of chisels, Number of drill bits, Vibration emission (wood)) and buy a liked model rotary hammers in one of the reliable online stores.
-
Product catalogs to browse
-
Rotary Hammer Drill Driver
- With this one tool, you cando a complete concrete anchor installation
- In the hammer mode, you can use a SDS masonry bit to drill the anchor hole
- Then you can change to the drilling mode and use the included bit adapter to drive the screw into the anchor
- Plus the LRH-144 has 5 clutch settings so you can use just the right amount of torque for the screw
- The 14.4V LI-ION battery provides plenty of power to drill up to 12 holes of 1/2 IN diameter x 1-1/2 IN deep in concrete
- High capacity battery: 14.4V LI-ION
- Hammering force: 21.6 kN
- Blow rate per minute (rotation with hammering): 0-3,800 bpm
- Speed at no-load (rotation only): 0-1,000 rpm10~ Clutch torque: 13 to 48.7IN-LB (5 stages - 8.8 IN-LB per stage)
- 3/4 IN SDS-plus bit system
- Ergonomic soft rubber grip for stress reduction
- Electronic performance monitoring system provides longer battery life
- Charging time (using LBC-81B charger): Usable: 35 minutes, Full: 50 minutes
- Dust-proof switch ensures long life
- Adapter for hex shank bits
- In the hammer mode, you can use a SDS masonry bit to drill the anchor hole
- Then you can change to the drilling mode and use the included bit adapter to drive the screw into the anchor
- Plus the LRH-144 has 5 clutch settings so you can use just the right amount of torque for the screw
- The 14.4V LI-ION battery provides plenty of power to drill up to 12 holes of 1/2 IN diameter x 1-1/2 IN deep in concrete
- High capacity battery: 14.4V LI-ION
- Hammering force: 21.6 kN
- Blow rate per minute (rotation with hammering): 0-3,800 bpm
- Speed at no-load (rotation only): 0-1,000 rpm10~ Clutch torque: 13 to 48.7IN-LB (5 stages - 8.8 IN-LB per stage)
- 3/4 IN SDS-plus bit system
- Ergonomic soft rubber grip for stress reduction
- Electronic performance monitoring system provides longer battery life
- Charging time (using LBC-81B charger): Usable: 35 minutes, Full: 50 minutes
- Dust-proof switch ensures long life
- Adapter for hex shank bits
-
Payment Methods
We accept:
