Security Or Access Control Systems Paxton
Here you can compare the prices for security Or Access Control Systems Paxton, get acquainted with photos and technical characteristics (for example Client interoperability, Client supported licenses, Alarm duration, Built-in auto dialer, Size, Power consumption (typical)) and buy a liked model security Or Access Control Systems in one of the reliable online stores.
-
Product catalogs to browse
-
411-501-US, Net2 classic w/ 2A PSU, White
- Single door networkable access control unit
- Use Paxton Access or 3rd party readers
- Diagnostic LEDs
- Good quality rising clamp connectors
- Net2 plus, Net2 classic and Net2 nano control units can be mixed on a site
- Distributed intelligence
- Event buffering
- Accepts Wiegand/Clock and Data Input
About - Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users" access. Each control unit is part of a network but can run independently making its own decisions and remembering events.
The control unit has FLASH memory which means that firmware can be upgraded from the PC. This is the key to making the system future proof.
Control units are sold as a PCB board only, within a plastic housing or mounted within a 2A boxed metal/plastic high voltage monitored backup power supply.
Installation - There is a label on the Net2 control unit that clearly shows connections for reader, lock, power supply, etc. The unit has a voltage free relay output and so can switch any lock or electrical device. Exit buttons, door contacts, tamper switches and alarm devices may be connected.
Control units connect together in a "daisy chain" dataline to form a network (see illustration below). At any point along the dataline the server PC connects to the network via a communications converter or across a LAN/WAN using the Ethernet interface.
There are diagnostic LEDs to assist with trouble free installation.
Operation - Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
Box contents
- Mains plug, 2 pin, US
- Connector - 2 way plug UL
- Fasteners - Grommet, 16mm i.d x 28mm o.d, 3mm panel
- Fasteners - 15mm PCB spacer 1.6mm board
- Fitting kit - Net2 ACU and 2A PSU in plastic or metal cabinet
- Label - 411-501 ratings label
- Label long fcc statement, 40x20mm
- Label - Net2 classic wiring label
- Label - Paxton box label
- Label - Technical help for US
- Net2 classic access control unit
- Cable tie Large
- 2A PSU plastic cabinet assembly
- 2A PSU in plastic housing
- Use Paxton Access or 3rd party readers
- Diagnostic LEDs
- Good quality rising clamp connectors
- Net2 plus, Net2 classic and Net2 nano control units can be mixed on a site
- Distributed intelligence
- Event buffering
- Accepts Wiegand/Clock and Data Input
About - Net2 is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users" access. Each control unit is part of a network but can run independently making its own decisions and remembering events.
The control unit has FLASH memory which means that firmware can be upgraded from the PC. This is the key to making the system future proof.
Control units are sold as a PCB board only, within a plastic housing or mounted within a 2A boxed metal/plastic high voltage monitored backup power supply.
Installation - There is a label on the Net2 control unit that clearly shows connections for reader, lock, power supply, etc. The unit has a voltage free relay output and so can switch any lock or electrical device. Exit buttons, door contacts, tamper switches and alarm devices may be connected.
Control units connect together in a "daisy chain" dataline to form a network (see illustration below). At any point along the dataline the server PC connects to the network via a communications converter or across a LAN/WAN using the Ethernet interface.
There are diagnostic LEDs to assist with trouble free installation.
Operation - Any changes made at the PC are immediately communicated and stored at the control unit. When a user presents their token to the reader, the control unit identifies them and permits or denies access as appropriate.
Box contents
- Mains plug, 2 pin, US
- Connector - 2 way plug UL
- Fasteners - Grommet, 16mm i.d x 28mm o.d, 3mm panel
- Fasteners - 15mm PCB spacer 1.6mm board
- Fitting kit - Net2 ACU and 2A PSU in plastic or metal cabinet
- Label - 411-501 ratings label
- Label long fcc statement, 40x20mm
- Label - Net2 classic wiring label
- Label - Paxton box label
- Label - Technical help for US
- Net2 classic access control unit
- Cable tie Large
- 2A PSU plastic cabinet assembly
- 2A PSU in plastic housing
-
Payment Methods
We accept:
