Video
| MPEG-4 frame rate |
30 fps |
| NTSC resolutions |
720 x 480 pixels |
| PAL resolutions |
720 x 576 pixels |
| Motion JPEG frame rate |
30 fps |
| Maximum video resolution |
720 x 576 pixels |
| Maximum frame rate |
30 fps |
| Channels quantity |
4 channels |
Ports & interfaces
| RS-422 ports |
4 |
| Line-in |
Y |
| RS-485 ports |
4 |
| BNC input ports |
4 |
| DC-in jack |
Y |
Networking
| Power over Ethernet (PoE) |
N |
| Copper ethernet cabling technology |
1000BASE-TX, 100BASE-TX, 10BASE-T |
| Wi-Fi |
N |
Technical details
| PTZ control (Pan/Tilt/Zoom) |
Y |
| Wall mountable |
N |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
Q7404 (UK) Video Encoder - Video server - 4 channels
High performance, four-channel solution
AXIS Q7404 Video Encoder is a high performance, four-channel standalone solution that integrates four analog cameras at a time into an IP-based video surveillance system. AXIS Q7404 delivers superb video quality and significant savings in bandwidth and storage with H.264.
Reduced bandwidth and storage needs
AXIS Q7404 offers the highly efficient H.264 video compression, which drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is also supported for increased flexibility.
Full frame rate in all resolutions
AXIS Q7404 can deliver multiple video streams simultaneously from each video channel at full frame rate in all resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The video streams can be individually configured with different compression formats, resolutions and frame rates for different needs.
Wide range of analog PTZ cameras supported
All Axis video encoders connect to analog pan/tilt/zoom (PTZ) cameras to allow for easy operation of these PTZ cameras across the IP network. Axis' open policy ensures simple and fast integration with most analog PTZ cameras on the market by including software drivers for more than 25 different analog cameras, including products from American Dynamics, Bosch, Canon, Panasonic, Pelco, Philips, Samsung, Sensormatic and Sony. It is also possible to control daisy-chained cameras from one RS-485/RS-422 serial port as long as they operate on the same protocol.
