Battery chargers Bosch

12A, 380W max., 6x 40A, 3x 5A, 150A back-up current, charcoal/silver The PLN‑24CH12 and PRS‑48CH12 Battery Chargers are designed for public address and emergency sound systems, to assure that the system batteries are always charged. Rack mountable, the unit charges lead‑acid batteries and simultaneously provides 24 V or 48 V for system components that use 24 V or 48 V exclusively. These chargers are fully compliant and certified to EN 54‑4. The battery chargers are premium quality, intelligent, microprocessor controlled devices.

Performance
The maximum charger current is 12 A for charging the battery. The maximum battery capacity, according to EN 54‑4, is therefore 225 Ah, minimum size is 86 Ah. The maximum output of the back‑up power system is 150 A. The charger has an input voltage range of 195 V to 264 V, and a power factor corrector. The charger features automatic shutoff when the battery voltage is too low, to prevent battery damage. It also features over‑voltage protection, protection against wrong battery polarity and short‑circuit protection. The outputs are protected by fuses. The power supply takes a resistance measurement of the battery including connections every 4 hours. The charger comes with a temperature sensor that is used to adjust the charging voltages. The charger has additional 24 V or 48 V (depending on model) auxiliary outputs, to supply power to equipment that needs 24 V or 48 V as primary power. The current capacity of these outputs is 5 A per output. The charger has relay outputs to signal a mains fault, battery fault and charger output voltage fault.