Bridges & repeaters Unibrain
Here you can compare the prices for bridges & repeaters Unibrain, get acquainted with photos and technical characteristics (for example Supported data transfer rates, Authentication method, Media access protocol, Heat dissipation, Size, Line coding format) and buy a liked model bridges & repeaters in one of the reliable online stores.
-
Product catalogs to browse
-
2 CAT5 Repeater400 + DC +12V power supplies
Unibrain’s CAT5 Repeater-400™ provides a low cost solution for extending the firewire bus by using standard CAT-5e (crossover) or CAT-6 type cables.
The transmission speed can reach up to 400 Mbps at maximum length of 70 meters (~ 230 ft).
CAT5 Repeater-400™ is using the new TSB41BA3B 1394b PHY from Texas Instruments and EqCologic’s 1394b to UTP cabling equalizer. It is optimized to create long-haul IEEE 1394b-2002 connections over CAT-5 or CAT-6 at the S400 data rate, but it can also be used at S200 and S100.
Features
Two (2) 1394a (Firewire 400) 6 pin ports operating at 100/200/400 Megabits per Second (Mbits/s)
One (1) UTP RJ45 port.
DC Power connector: Walkman-type 2.0 mm DC Jack (Power supply adapter included with kit)
Power Input Range: DC 8V~30V, max. 1.35A.
Power consumption (at 12V DC): 0.25 W
Full Duplex Data Rate at 100/200/400 Mbps.
Fully Interoperable With Firewire, SB1394, and i.LINK Implementation of IEEE Std 1394.
Operating temperature: 0′ – 60′ C.
Mechanical dimensions: 112 x 62 x 22 mm (or 112 x 72 x 22 mm, including the firewire ports).
The transmission speed can reach up to 400 Mbps at maximum length of 70 meters (~ 230 ft).
CAT5 Repeater-400™ is using the new TSB41BA3B 1394b PHY from Texas Instruments and EqCologic’s 1394b to UTP cabling equalizer. It is optimized to create long-haul IEEE 1394b-2002 connections over CAT-5 or CAT-6 at the S400 data rate, but it can also be used at S200 and S100.
Features
Two (2) 1394a (Firewire 400) 6 pin ports operating at 100/200/400 Megabits per Second (Mbits/s)
One (1) UTP RJ45 port.
DC Power connector: Walkman-type 2.0 mm DC Jack (Power supply adapter included with kit)
Power Input Range: DC 8V~30V, max. 1.35A.
Power consumption (at 12V DC): 0.25 W
Full Duplex Data Rate at 100/200/400 Mbps.
Fully Interoperable With Firewire, SB1394, and i.LINK Implementation of IEEE Std 1394.
Operating temperature: 0′ – 60′ C.
Mechanical dimensions: 112 x 62 x 22 mm (or 112 x 72 x 22 mm, including the firewire ports).
-
Payment Methods
We accept:
