Here you can compare the prices for cable protectors Ancor, get acquainted with photos and technical characteristics (for example Number of cable ducts, Auxiliary tool included, Diameter, Dimensions (WxDxH), Length, Colour of product) and buy a liked model cable protectors in one of the reliable online stores.
Coax Bulkhead/Deck Feed Through
COAX Bulkhead/Deck Feed T hrough 1pc/Clam 5Clams.
- To install Ancor twist-on connectors, strip the cable to expose 9/16" of the center conductor. Strip the outer jacket to expose 1/4" of the braid. Make sure that the braided shield does not touch the inner conductor. Insert the cable into the connector until the center conductor protrudes through the center of the connector. Twist the small knurled end while gently pushing the connector onto the cable until resistance is felt. Crimp or solder the center conductor. Cut off any excess. It is strongly recommended that a piece of Ancor 3/4" heat shrink be installed on all exterior UHF connectors to waterproof and relieve strain. - FITTING 1/8IN W/NUT.
By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.