Psion Cable Tether Cable Tether for WORKABOUT PRO
Psion ST4003 Desktop Docking Station (USB, Ethernet / RS232) for Omnii
The Desktop Docking Station (USB, Ethernet / RS232) includes power supply, country adapters
Psion ST4002 The Desktop Docking Station (USB) for Omnii includes power supply, country adapters & active sync cable
Psion HU1010 Powered Fork Lift Cradle 10 - 90VDC with single hand release capability. Various mounting accessories and upgrade kits available as optional extras
Psion HU6001 Pistol Grip Kit for 7535 G2
The Pistol Grip Kit comes complete with center balanced pistol grip, mounting screws and installation instructions to all
Psion HU1000 Non Powered Fork Lift Cradle
Fort Lift Cradle with single hand release capability. Various mounting accessories and upgrade kits available as optiona
Psion CV1030 Powered and Port Replicator Cradle
The CV1030 provides maximum versatility by combining the benefit of pass-through power and charging capability to
Psion HU1030 Powered Fork Lift Cradle with Port Replicator
Powered Fork Lift Cradle with port replicator with single hand release capability. Various mounting acc
Psion CV6001 Pistol Grip Kit for 7530 G
Psion PX3062 The Protective Rubber Boot for NEO is designed to provide greater protection in harsh environments. The Protective Rubber Boot can be used with the P
Psion 7530 G2 / 7535 G2 Shoulder Strap 7530 G2 / 7535 G2 Shoulder Strap
The Shoulder Strap allows the secure carrying of the 7535 G2 and 7530 G2 handheld computers
Psion Service Kit - PDM (Plus) Service Kit - PDM (Plus)
Includes: PDM, Universal AC adapter, 1 USB Cable, Null Modem Serial Cable
Psion PDM (Portable Docking Module) PDM (Portable Docking Module)
Attaches to the bottom of the 7535 G2 / 7530 G2 and features power, USB and serial port connectivity
Psion 1D Laser End-Cap with GSM Antenna Shroud The 1D Laser End-Cap with GSM Antenna Shroud is a compact and ergonomic scanning solution. The 1D laser scanner reads at a rate of 104 scans/second ±
Psion 2D Slim Pod HHP 5180 Imager 2D Slim Pod HHP 5180 Imager
Compatible with pistol grip WA6102-G1 as well as with G1 and G2
Psion 1D Imager End-Cap with GSM Antenna The 1D Imager End-Cap with GSM Antenna Shroud is a low power, compact, and ergonomic scanning solution. It has an extremely high read rate which make
Psion 2D Large Pod SX5400 Imager 2D Large Pod SX5400 Imager
SX5400 2D large pod imager. Compatible with G2 only. Also compatible with WA6102-G1 pistol grip
Psion 1D Imager End-Cap without GSM Antenna The 1D Imager End-Cap without GSM Antenna Shroud is a low power, compact, and ergonomic scanning solution. It has an extremely high read rate which m
Psion 1D Laser End-Cap without GSM Antenna Shroud The 1D Laser End-Cap without GSM Antenna Shroud is a compact and ergonomic scanning solution. The 1D laser scanner reads at a rate of 104 scans/secon
Psion NEO Pistol Grip NEO Pistol Grip
The PX3035’s ergonomic design with its overmolded soft rubber grip provides added comfort when extensive scanning is required. Easily
Psion Wall Charger Adapter Wall Charger Adapter
-Includes wall adaptor with DC Jack and assortment of clip-on power plugs.\n-Supports 110-240VAC.\n-Includes International plug
Psion NEO Handstrap NEO Handstrap
Handstrap fastens to the back of the handheld with adjustable strap and release clip. Features stitched elastic stylus holder, threaded
Psion NEO Shoulder Strap NEO Shoulder Strap
Single loop adjustable length shoulder strap with release clip. Uses small gauge threaded loop
Psion Tether -> USB A Cable Tether to USB A Cable
Enables users to connect USB A terminated devices (such as printers, scanners, GPS module) to the WORKABOUT PRO, 3 point tether
Psion Powered Vehicle Cradle 12-24 V Powered Vehicle Cradle 12-24 V
The CH1005 vehicle cradle is a powered device, designed to seucurely grip the Ikôn when locked in and an easy single h
Psion Hand strap Hand strap
The hand strap can be attached to the back of the Ikôn to provide a secure means for operators to carry the Ikôn. \n\nThe hand strap is at
Psion Non-Powered Vehicle Cradle Non-Powered Vehicle Cradle
The CH1000 vehicle cradle is a passive device, designed to securely grip the Ikôn handheld computer. The cradle design per
Psion Door High Capacity Battery (S) Door High Capacity Battery (S)
This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3020) and (WA3006) to be used with the
Psion Soft-Shell Holster Soft-Shell Holster
This convenient and easy to use soft-shell holster with removable belt and swivel holster pad can be used to hang a WORKABOUT PRO
Psion 1D EV15 Imager 1D EV15 Imager
This integrated 1D imager provides exceptional scanning performance and great reliability at a fraction of the cost of a standard lase
Psion End-Cap (Standard) End-Cap (Standard)
This replacement part is for a standard End-Cap suitable for all WORKABOUT PRO models
Psion Door High Capacity Battery (M,C) Door High Capacity Battery (M,C)
This battery door allows the High Capacity Lithium Ion Rechargeable Battery (WA3020) and (WA3006) to be used with t
Psion RV6091 RV6091, Black
Carrying Cas
Psion ST9706 ST9706, Black
Back Cover Standard Long 5080 2D Image
Psion ST6090 Carrying Case - Standard Back
This protective carrying case does not interfere with scanning and can be used with or without the scanner attached. It
Psion ST6080 Protective Rubber Boot, standard back, yellow
Psion MT3406 RAM mount, 30.48 cm (12 ") arm with 1 VESA plate for 8580 / 8590
The easily installed RAM mount allows a terminal to be mounted on any plane of the 3
Psion ST6055 Hard Shell (Form Fit) Holster - Standard Back
This hard shell holster provides a comfortable and durable carrying case for the Omnii with pistol grip
Psion PX3025 Belt Kit
Utilizes existing quick release belt clip (9003637) with adapter and 2 screws
Psion ST6051 Forklift Holste
Psion ST6050 Soft Shell Holster
This convenient and easy to use soft shell holster with removeable belt can be used to hang an Omnii with a pistol grip securely f
Psion VA6110 Protective Cover for Touch Screen (package of 12)
Keep your vehicle mount computer screens safe from damage and clean with these handy protectors
Psion ST6104 Pistol grip switch cover
Psion ST6400 Pistol Grips – Standard Back Cover Auto Range Laser
The Pistol Grip allows the Omnii to be used in scanning or imaging applications using the built-i
Psion ST9701 Standard Back Cover Long SE1224HP 1D Laser
Psion ST9101 Standard Pod Laser Scanners for Omnii XT10
Standard Pod Kit SE1224HP 1D Laser (Model # ST9101) exist for Omnii XT10. These require Expansion Back Cov
Psion ST6103 Black Stylus Tether for Omnii XT15, 3 Pack
The ST6103 Stylus Tether for Omnii XT15 comes in a pack of 3 and can be used to tether the Short Yellow Stylus (
Psion ST6100 Black Standard Back Cove
