Here you will find heat detectors of all known manufacturers (for example: Ei Electronics, Hager, Lifebox, Pentatech, König, GEV)
. Can compare prices and technical specifications (Fixed temperature point, Manual, Placement supported, Input voltage, Detector type, Master carton width).
Thermistor, 10.5-30 VDC, 85 dB, 310 g, Ø 145 mm, White
The Ei184 is a Heat Alarm that is designed to operate with suitable 8-30 volt control panels and to provide a loud local alarm.
The Ei184 has advanced features such as the ability to interconnect up to twelve alarms to allow all alarms to sound if just one of the interconnected alarms should be triggered.
Relay contacts (normally open and closed supplied) are available for triggering the panel itself and its associated ancillary products, such as extra loud sirens, magnetic door holders etc.
- The Ei184 is ideal for use in kitchens and garages, where the use of optical or ionisation alarms would lead to unwanted nuisance alarms. - The Ei184 is easily installed and comes supplied with all necessary screw fixings.. - The heat alarm will activate the built in sounder upon detecting heat that reaches 58 C - The heat alarm will automatically reset itself and silence the sounder when the temperature drops below the preset level. - The built in sounder will provide a minimum sound output of 85dB at 3m - The “Test/Hush” button will silence nuisance alarms if any - The “Test”/Hush button will simulate the effect of heat and tests sensor, electronics and horn-use to check performance at least monthly
- Fixed temperature fast response thermistor type - sensor, range 54°C to 62°C - Supply voltage 10.5 – 30 VDC - Test/Hush button - Interconnect up to 12 alarms - Relay contacts - Built in sounder - Automatic reset facility - Kitemarked to BS5446-2: 2003 - 5 year guarantee
By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.