Interface cards/adapters Brodit
Here you can compare the prices for interface cards/adapters Brodit, get acquainted with photos and technical characteristics (for example Port multiplier, Printer support, Processor frequency, IPP support, eSATAp, Network architecture) and buy a liked model interface cards/adapters in one of the reliable online stores.
-
Product catalogs to browse
-
Mounting plate with Tilt Swivel, centered. Low Smaller, lower face plate. The choice for an adjustable monitor angle. Fits VDO Dayton 5000, MM 5500. Install onto ProClip. ProAdapt is designed to be mounted with the ProClip mounting platform.
1. Remove the screw so you get two parts, one ProAdapt face plate and one attaching part (the smallest part).
2. Screw the attaching part onto the ProClip by using the enclosed screws.
3. Place the face plate onto the attaching part so the holes in the tilt swivel fit. Screw the face plate onto the attaching part. Note that the face plate will be harder/looser to tilt and swivel depending on how tight you screw on the screw.
4. The screen mount is in place. Place the screen onto the screen mount by sliding it downwards from above onto the wedge in the center of the face plate.
1. Remove the screw so you get two parts, one ProAdapt face plate and one attaching part (the smallest part).
2. Screw the attaching part onto the ProClip by using the enclosed screws.
3. Place the face plate onto the attaching part so the holes in the tilt swivel fit. Screw the face plate onto the attaching part. Note that the face plate will be harder/looser to tilt and swivel depending on how tight you screw on the screw.
4. The screen mount is in place. Place the screen onto the screen mount by sliding it downwards from above onto the wedge in the center of the face plate.
-
Payment Methods
We accept:
