Interface cards/adapters Hamlet
Here you can compare the prices for interface cards/adapters Hamlet, get acquainted with photos and technical characteristics (for example Port multiplier, Printer support, Processor frequency, IPP support, eSATAp, Network architecture) and buy a liked model interface cards/adapters in one of the reliable online stores.
-
Product catalogs to browse
-
XSATACI Controller SATA PCI
This SATA PCI card is compliant with Serial-ATA 1.0 specifications, to upgrade your desktop computer for dual Serial ATA RAID Channels (one internal and one external) and one fully Parallel-ATA Host controller for supporting single channel. The PCI card provides up to 33/66 MHz ,fully compliant Serial ATA ports on the device side to access Serial ATA hard disk drive. Striping (RAID 0) and Mirroring (RAID 1) improve the data performance and provide the data redundancy.
- Serial-ATA Interface 1.5 Gb/s data rate.
- Supports SATA 1.0 (High Speed Serialized AT Attachment, Revision1.0).
- Completely SW transparent with Parallel ATA.
- Supports Host adapter register interface(SCR, Status and Control Registers).
- Parallel-ATA Interface.
- Supports Ultra DMA Mode Transfers up to Mode 6 Timing (133 Mbts).
- Supports 48-bit LBA (Large Disk), hard driver larger than 137GB.
- Supports PIO Modes up to Mode 4 Timings,and Multiword DMA Mode 0,1,2 with Independent Timing of up to 4 drives.
- Supports Tri-state IDE Signals PCI Bus Interface.
- Compliant with PCI specification revision 2.2.
- Supports up to 33/66 MHz PCI interface clock.
- Serial-ATA Interface 1.5 Gb/s data rate.
- Supports SATA 1.0 (High Speed Serialized AT Attachment, Revision1.0).
- Completely SW transparent with Parallel ATA.
- Supports Host adapter register interface(SCR, Status and Control Registers).
- Parallel-ATA Interface.
- Supports Ultra DMA Mode Transfers up to Mode 6 Timing (133 Mbts).
- Supports 48-bit LBA (Large Disk), hard driver larger than 137GB.
- Supports PIO Modes up to Mode 4 Timings,and Multiword DMA Mode 0,1,2 with Independent Timing of up to 4 drives.
- Supports Tri-state IDE Signals PCI Bus Interface.
- Compliant with PCI specification revision 2.2.
- Supports up to 33/66 MHz PCI interface clock.
-
Payment Methods
We accept:
