Design
Supported motherboard form factors |
ATX, Micro-ATX |
Form factor |
Midi-Tower |
Type |
PC |
Other features
External drive bays |
1x 3.5", 3x 5.25" |
Internal drive bays |
5x 3.5" |
Ventilation fan(s) |
3x 120mm |
Expansion slots |
7 |
Ports & interfaces
Firewire (IEEE 1394) ports |
1 |
eSATA ports quantity |
1 |
PC-K7C - Micro ATX & ATX, Hybrid Midi Tower, 3x 120mm, 1x 3.5" & 3x 5.25" (external), 5x 3.5" (internal), 7x expansion slots, 4x USB 2.0, 1x IEEE1394, 1x eSATA, HD+AC97 Audio, 7.2kg, champagne gold
LanCool insisted on providing highest quality products, and all the products are made in Taiwan , with high standard workmanship and best material.
For external finishing, LanCool used the high quality Taiwan made aluminum alloy panel on Metal Boned K7C. With hair-line brush and anodized treatment on the surface, to make the external in metallic finishing. Most the sharp edges has been removed, or cover up with protection for maximum safety.
Metal Boned K7C designed for LAN party users, from external design to internal features. The user interface, hardware structure, and finishing, all require to pass a lot of test to ensure highest product quality.
Metal Boned K7C has minimalism theme, simple lines, with intake vent holes, all design with purpose. Nothing is un-necessary.
LAN party user need solid chassis which can maintains in good shape to house their hardware during travel. The housing is 0.8mm thick SECC, strength 40% tougher, external in aluminum, easy to cut and modify.
Metal Boned K series has metal structure, for tougher housing, allow carry heavy hardware, built for LAN Party Gamers.
K7C has equipped with powerful cooling system, there are two 120mm intake fans in the front, one 120mm exhaust fans at the rear ( plus the fan in the power supply units), there will be total of two intake fans, and two exhaust fans, perfect cooling solution.
The 120mm fans on Metal Boned K7, features high airflow in low RPM, these fans can cool the system down, with lower noise level. All the fans are 1000RPM.
There are special made anti-vibration HDD kit with rubber suspension. The rubber suspension absorb the vibration to reduce the noise.
There are anti-vibration spring on the chassis, to reduce the noise which cause by the vibration.
There are jointer on the front panel, allow user can remove the front panel without tool. And the switch all build on the chassis, no on the front panel. Therefore no need to pull out cables when remove the front panel.
There are air filters in front of the two 120mm intake fans, to stop the dust to enter the housing, and these air filter are washable for replete use.
The installation of optical drive on Metal Boned K7C is easy, simply slide in the drive into the 5.25” rack, and the plastic mounting kit will secure it in position, to remove it, simple pull the mounting kit to release the drive.
It is easy to install motherboard, K7C features removable motherboard tray, user can install the motherboard on the tray outside the case, no more working in small space.
There are two cable clips behind the motherboard tray, user can tidy up the cable, and hide the cables behind the motherboard.
Power Supply bracket for support today's power supply unit which are heavy, and the bracket will hold the power supply in position while traveling.
The top cover is removable, for user to service or upgrade system easier, and there are optional top cover for liquid cooling system.
The multi-media I/O ports has upgraded onPC-K7C! Now the I/O ports located on the top of the case for easy access. Due to today's requirement, Lian Li designer add extra USB ports, and provide new interface, now PC-K7C has total four USB 2.0 ports, and E-SATA connectors. There are also a dust -free cover to protect the I/O ports.