lathe accessories

Precision lathe, 250mm Centre, Swing 70mm, cross slide 43mm, 12kg <b>For face, longitudinal and taper turning, thread-cutting. For machining st

Lathe system <b>The Lathe PD 400 is the heart of a multifunctional and expandable system and is unequalled in its class!</b>\nIdeal for s

BT-ML 300, 230V, 50Hz, 370W, Idle speed (step 1): 0 - 1100 RPM, Idle speed (step 2): 0 - 2500 RPM, Jaw chuck bore 15 mm, Max. spindle admission 20 mm

Precision V-blocks Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V

Precision vice PM 40 Jaw width of 46mm. Clamping capacity 34mm. Total length 70mm

Step clamp set, of milled steel For work pieces up to 35mm thickness. Two each step blocks and clamps. With matching nuts and screws for fixation in

4-jaw chuck with independent jaws For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm

Fixed steady for longer work pieces Especially for boring. Also required if the tailstock cannot be used to "counter". Up to Ø 40mm

Dividing attachment TA 250 For accurate machining of circular work pieces (e.g. production of gear wheels). Supplied with two dividing discs (40 and

Collet set with ER 20 collets: For extreme true concentric accuracy. 2 - 10mm. For high precision machining of round parts. The collet set is mounted

Quick change tool post - easy to use! For quick tool change and easy height adjustment. Includes 2 tool holder elements

Centre turning attachment. For highest accuracy with high rotational precision.\nThis includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) a

Collet attachment including collets For accurate use on round components. One hardened collet each hardened collet 2.0 - 3.0 - 4.0 - 5.0 - 6.0 - 8.0

Tool post for PD 400 Including two holders. Provides quick tool changes with easy height adjustment

Faceplate and clamps Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous

4 jaw chuck, self-centering The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm

Fixed steady Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is ina

14-piece parallel supports set Ground in pairs For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened ste

Centre turning accessory for the PD 400 Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face pl

Parting tool holder and tool Used in the PD 400 quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt

Universal dividing table UT 400 For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for div

Travelling steady Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm

4 jaw chuck, self-centering The jaws are not independently adjustable, i.e. they are self-centering. High accuracy. Chuck diameter 100mm

Splash guard and chip collecting tray for lathe PD 400 Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes

Fine feed for milling machine PF 230 Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed i

Fine feed for accurate adjustments Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwh

Centre turning attachment <b>Used for highest accuracy with high rotational precision.</b>\nOne face plate, 2 fixed MK 1 (short) centres

Fixed steady Used when turning long, slender pieces, capacity up to 40mm (Ø). Also used when the tailstock cannot be utilised

Dividing attachment TA 230 for PF 230 For accurate machining of circular work pieces (e.g. production of gear wheels). Supplied with two dividing dis

Four jaw chuck The 4 jaws are adjusted independently, thus clamping unsymmetrical pieces, ovals, squares and odd-shaped work pieces. Capacity of 80mm

Collet set covering 2.0 - 10mm <b>For concentric accuracy better than 0.02mm.</b>\nFor accurate use on round components. The collets are

Radius cutting attachment Mounted on the cross slide in place of the tool holder. Cuts convex and concave shapes to depth of 1.0mm in steel as well a

Quick change tool post f/ PD 230/E Enables quick tool changes and easy height adjustments. Including 2 tool holders for lathe tools up to 10 x 10mm

Gear chuck Capacity to 10mm, with key and MK1, for tailstock

Splash guard and chip collecting tray for PD 230/E Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow sligh

Tool Holder for Rotary Tools This holder allows mounting of our rotary tool IB/E (collar size 4/5" (20 mm)) to the tool post of the Lathe PD 230

MICRO woodturning lathe DB 250 <b>Turning in miniature is a pleasing hobby.</b>\nOne can make glasses, cups, saucers, vases and columns f

Lathe system PD 230/E Usable on materials such as steel, brass, aluminium and plastic. Complete with automatic feed, thread cutting capability, heads

21515215