CardBus PC Card Single PCI Bus Host Adapter (TI)
This Low Profile PCI form factor Bring Two PC Cards (PCMCIA, CardBus, SmartMedia, MultiMedia, SD, Memory Stick, Smart Card) in your Desktop Computer System
This PCI Host Adapter supports two independent card sockets compliant with the PC Card Stand ard (rev. 7.1).
The board is the best choice for bridging between PCI and PC Cards in both notebook and desktop. IT supports any combination of 16-bit PCMCIA and 32-bit CardBus PC Cards in the two sockets, powered at 5 V or 3.3 V, as required.
FEATURES
- Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
- Supports Type I, Type II, Type III PC Cards
- Two independent PC Card socket compliant with PC Card Standard 7.1
- PCI Bus Power Management Interface Specification 1.1 compliant
- Advanced Configuration and Power Interface Specification 1.0 compliant
- PCI Local Bus Specification Revision 2.2 compliant
- PC 98/99 compliant
- Compliant with the PCI Bus Interface Specification for PCI-to-CardBus Bridges
- Supports active Flash media and Smart Card adapters
- Programmable D3 status terminal
- Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus cards
- Supports two PC Card or CardBus slots with hot insertion and removal
- Supports 132-MBps burst transfers to maximize data throughput on both the PCI bus and the CardBus bus
- Interrupt modes supported: serial ISA/serial PCI, serial ISA/parallel PCI, parallel PCI only
- Multifunction PCI device with separate configuration space for each socket
- Five PCI memory windows and two I/O windows available to each 16-bit PC Card socket
- Two I/O windows and two memory windows available to each CardBus socket
- ExCA-compatible registers are mapped in memory or I/O space
- Intel 82365SL–DF register compatible
- Internal data path logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance
- Independent buffering and the pipeline architecture provide a high performance level with sustained bursting
- Two LEDs indicate for Socket activity.