Here you can compare the prices for interface cards/adapters LyCOM, get acquainted with photos and technical characteristics (for example Port multiplier, Printer support, Processor frequency, IPP support, eSATAp, Network architecture) and buy a liked model interface cards/adapters in one of the reliable online stores.
Raid5 eSATA II -3Gbps External 4Ports PCI-e 8 lane Host Adapter
eSATA II-3Gbps External 4Ports PCI-e x8 card support NCQ, Port Multiplier, Raid5, Raid10, Raid0, Raid1 and JBOD!
RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1 (mirrored-stripping), RAID 5 (Distributed Parity RAID) and JBOD (Just Bunch of Disks) manage multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without the loss of data.
FEATURES - Four eSATA fully compliant External connectors on card - 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB - Efficiently cooling by Active Heat Sink with Blast Fan - Eight Layers PCB - Fully RoHS compliant
PCI-e - x8 PCI Express Bus - PCI Express Specification, Revision 1.0a - Maximum realized bandwidth on PCI Express interface is 2 GB/s in each direction simultaneously, for an aggregate of 4 GB/s
High Speed Serial ATA - Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1 - Hot-plug capability - Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps - Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1 - Supports First-party DMA commands for Native Command Queuing (NCQ) - Plesiochronous, Single PLL architecture, 1 PLL for 4 ports - Output Swing Control - Supports four independent SATA channels - Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution - 31 Commands and Scatter/Gather Tables per Port - Four Pin header on board for Device LED connection - Jumper enable / disable on board SATA BIOS - Protocol Override per Command - Staggered Spin-up Control - RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate - JBOD is a virtual disk that combines all disk drives as one entire disk drive. - Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously reading data from multiple drives - Provides RAID 1 (Mirroring) to protect the data from the disk failure by writing identical data on 2 drives - RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring - Completely with drivers for Windows 2000 ,XP and 2003 Server - Supports 64bit / 32bit Windows Vista - Mac OS X v10.3.9, v10.4.9, v10.4.10, v10.5.1 Non-booting driver supported by SiliconImage SiI3124. - Linux 32bit / 64bit drivers supported for RHEL 4.0 Up2, RHEL 4.0 Up3, SuSE9.0 SP2, SuSE9.0 SP3 by SiliconImage SiI3124. - Chipset: Intel and SiliconImage
By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.