Other features
| Mac compatibility |
N |
| Data transfer rate |
1500 Mbit/s |
ST-134e, PCI Raid ESata 4 ext Ports
eSATA 4Ports RAID !
Add LyCOM Reliable and Eye-Pattern Proven 1,500Mbps of Serial ATA External 4 Ports and RAID 0, RAID 1, RAID 0+1, RAID 1+S(Mirrored-Sparing) to your system
FEATURES
- Four shielded and durable eSATA external connectors;
- 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB;
- Four high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s;
- Hot-plug capability;
- Fully compliant with Serial ATA 1.5G specifications;
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives;
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on two drives;
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring;
- RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed;
- Supports ATAPI commands;
- Supports Spread Spectrum in receiver;
- Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes;
- Compliant with PCI Specification, revision 2.2;
- Integrated PCI DMA engines;
- Four Pin header on board for LED connection;
- 32 bit, 33/66MHz fully compliant PCI host interface;
- Supports Windows 98, Millennium, NT 4.0, 2000, XP, 2003 and Linux, Novell Netware;
- Acts as NON-RAID when BIOS not configured RAID;
- Supports 64bit / 32bit Windows Vista;
- Linux 32bit / 64bit drivers support for Fedora Core2, Fedora Core3, Fedora Core4, RHEL 4.0, RHEL 4.0 Up1, SuSE 9.0 SP1 RC5, SuSE Pro 9.2, SuSE Pro 9.3. See SiliconImage SiI3114;
- Fully RoHS compliant;
- Chipset : SiI3114.
