Ports & interfaces
| BNC output ports |
1 |
| RS-485 ports |
1 |
| DC-in jack |
Y |
Performance
| PTZ control (Pan/Tilt/Zoom) |
Y |
Networking
| Supported network protocols |
TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, SNMPv1/v2c/v3 |
| Ethernet LAN data rates |
10, 100 Mbit/s |
Power
| Power consumption (max) |
8 W |
| AC adapter output voltage |
24 V |
Additionally
| On/Off switch |
N |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| RS-232 port |
1 |
1-channel H.264/MJPEG industrial video decoder
- Decode H.264 and MJPEG video streams to an analog video signal automatically
- Manual selection or automatic scan with maximum of 64 video sources
- 2-way (1 in, 1 out) audio supported
- Transparent PTZ control with legacy PTZ controller
- SNMP for network management
The VPort D361 is a 1-channel video decoder for decoding H.264/MJPEG video streams from VPort series video encoders and VPort IP cameras back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors, multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice-over-IP communication between the video encoder and decoder.
Monitoring your cameras that are part of a large CCTV system is easy with the VPort D361, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2 DIs located on the top panel of the VPort D361 can be used to create 2 control buttons for up and down video source selection.
