Network media converters Edimax
Here you can compare the prices for network media converters Edimax, get acquainted with photos and technical characteristics (for example Per-port bandwidth control, Fibre optics wave type, MAC address table, Packet transfer speed, Stacked VLAN, Store-and-forward) and buy a liked model network media converters in one of the reliable online stores.
-
Product catalogs to browse
-
10/100/100FX Single Mode 30KM-SC Fibre Converter
Best media conversion solutions for network connectivity
Edimax's full series of Media Converter are designed to meet the needs for
massive optical fiber network, provide the whole Ethernet / Fast Ethernet network
implementation.
Migrating between copper and fiber-based Medium
ET-912+ series convert the signals between two different transmission medium,
allowing user a simple and cost-effective method to migrate between UTP cable
and fiber optic cable. It can transmit signals up to 2km (multimode)
and 30/40/60/80/100km (single-mode) in fiber medium, allowing users to
extend network.
Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10 Base-T and 802.3u
100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45
port to connect to a 10/100 Base-TX device such as workstation
or switch and one fiber connection to connect a 100 Base-FX device.
Built in Switching ASIC
ET-912+ series have turned the function more like a 2 ports switch than a
traditional converter. User can get all switching benefits such as frames checking
and filtering.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm
could allow user to monitor and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as
power voltage drop below 2.9V, this action can make sure fiber port and TP port
work normally when thunder storm or power unstable occuring cause the power
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.
Edimax's full series of Media Converter are designed to meet the needs for
massive optical fiber network, provide the whole Ethernet / Fast Ethernet network
implementation.
Migrating between copper and fiber-based Medium
ET-912+ series convert the signals between two different transmission medium,
allowing user a simple and cost-effective method to migrate between UTP cable
and fiber optic cable. It can transmit signals up to 2km (multimode)
and 30/40/60/80/100km (single-mode) in fiber medium, allowing users to
extend network.
Comply with IEEE Standards
ET-912+ series are fully compliant with IEEE 802.3 10 Base-T and 802.3u
100 Base-TX, 100 Base-FX standards. The device comes with one RJ-45
port to connect to a 10/100 Base-TX device such as workstation
or switch and one fiber connection to connect a 100 Base-FX device.
Built in Switching ASIC
ET-912+ series have turned the function more like a 2 ports switch than a
traditional converter. User can get all switching benefits such as frames checking
and filtering.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm
could allow user to monitor and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as
power voltage drop below 2.9V, this action can make sure fiber port and TP port
work normally when thunder storm or power unstable occuring cause the power
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.
-
Payment Methods
We accept:
