Here you can compare the prices for network media converters ZyXEL, get acquainted with photos and technical characteristics (for example Per-port bandwidth control, Fibre optics wave type, MAC address table, Packet transfer speed, Stacked VLAN, Store-and-forward) and buy a liked model network media converters in one of the reliable online stores.
MC-1000SFP media converter SFP to 1000Base T, 1x 10/100/1000 port(MDI/MDI-X), 1x open SFP slot
The most cost-effective, flexible solution for mixed copper/fiber environments The MC1000-SFP is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The MC1000-SFP copper-to-fiber module is available in 10/100Mbps Fast Ethernet and 1000 Mbps Gigabit Ethernet types, allowing seamless integration between Fast/Gigabit Ethernet networks using unshielded twisted pair (UTP) copper cabling, and Gigabit fiber networks.
Long-haul Gigabit Ethernet Depending on the distance between two sites, users can select and insert proper SFP Transceivers into the slots for different network environments: multi-mode SFP for short distance (up to 550m) or single-mode SFP for long distance (from 10km to 40km or 70km maximum). Regardless of the scale of deployment, the MC1000-SFP is the most cost-effective, flexible solution for mixed copper/fiber environments like LANs, campus networks or even Metropolitan Area Networks.
Easy Installation The Auto-negotiating Ethernet function empowers the Gigabit RJ-45 port on MC1000-SFP to negotiate transmission speed and mode with peer devices automatically; and the Auto-crossover Ethernet port can prevent circuit mismatch problems by auto-sensing MDI/MDIX configuration. With these intelligent functions, MC1000-SFP can be paired with a switch, a NIC (Network Interface Card) or a Gigabit Ethernet device via a UTP/STP cable easily.
Easy Troubleshooting With the Link Loss Forwarding mechanism activated, any detected broken link on the RJ-45 Ethernet port will force the fiber port to take over, and the fiber uplink port will stop transmitting then "turned off" as soon as the remote link is down. Transparent link status will be delivered by the Link Loss Forwarding mechanism to facilitate the troubleshooting process.
By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.