Network switches Lantronix
Here you can compare the prices for network switches Lantronix, get acquainted with photos and technical characteristics (for example Switching fabric type, Shock, Heat dissipation note, Multicast support, MAC address table, Processor frequency) and buy a liked model network switches in one of the reliable online stores.
-
Product catalogs to browse
-
8 x 10/100TX ports, 1 x 100BaseFX port, 4K MAC addresses, 2 km distance, RS-232 console, Telnet, SNMP V1 / V2, RMON, TFTP
XPress-Pro SW 94012F; hardened manageable -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with Din Rail.
With a complete line of rugged, dependable, affordable Ethernet switches, the XPress-Pro SW series delivers a total networking solution for the industrial environment.
Part of the DeviceLinx family of network enablement products, XPress-Pro SW series managed and unmanaged Ethernet switches from Lantronix are designed to give you performance you can count on in the harsh environments often found at the edge of the network.
Whether they’re on the factory floor or in the field, XPress-Pro switches will provide flawless communication when you need it most. These full-featured Ethernet switches are the latest Lantronix innovations for the industrial automation marketplace.
The XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs, configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs via a terminal block.
- 4K MAC addresses
- 256 KB buffer memory
- Redundant 2A max, 10 to 30 VDC power inputs
- -34° to 74° C (-29° to 165° F) operating temperature range
- Hardened aluminum case
- Supports DIN-rail, panel, or rack-mounting installation
- Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment
- IEEE 802.1w RSTP and IEEE802.1D STP compatible
- IP multicast filtering through IGMP snooping
- Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
- IEEE802.1p QOS classification based on port-based priority, VLAN priority field in VLAN-tagged frame, DS/TOS field in IP packet, UDP/TCP logical ports
- 8-port-based trunking groups with up to 8 ports per group
- Rate control
- Packet filtering and port security: destination MAC and static MAC address are not subject to aging; secure mode freezes MAC address learning
- Port mirroring
- Alarms for power failure by relay output
- UL 1604: Class 1, Division 2 classified for use in hazardous locations
With a complete line of rugged, dependable, affordable Ethernet switches, the XPress-Pro SW series delivers a total networking solution for the industrial environment.
Part of the DeviceLinx family of network enablement products, XPress-Pro SW series managed and unmanaged Ethernet switches from Lantronix are designed to give you performance you can count on in the harsh environments often found at the edge of the network.
Whether they’re on the factory floor or in the field, XPress-Pro switches will provide flawless communication when you need it most. These full-featured Ethernet switches are the latest Lantronix innovations for the industrial automation marketplace.
The XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs, configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs via a terminal block.
- 4K MAC addresses
- 256 KB buffer memory
- Redundant 2A max, 10 to 30 VDC power inputs
- -34° to 74° C (-29° to 165° F) operating temperature range
- Hardened aluminum case
- Supports DIN-rail, panel, or rack-mounting installation
- Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment
- IEEE 802.1w RSTP and IEEE802.1D STP compatible
- IP multicast filtering through IGMP snooping
- Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
- IEEE802.1p QOS classification based on port-based priority, VLAN priority field in VLAN-tagged frame, DS/TOS field in IP packet, UDP/TCP logical ports
- 8-port-based trunking groups with up to 8 ports per group
- Rate control
- Packet filtering and port security: destination MAC and static MAC address are not subject to aging; secure mode freezes MAC address learning
- Port mirroring
- Alarms for power failure by relay output
- UL 1604: Class 1, Division 2 classified for use in hazardous locations
-
Payment Methods
We accept:
