Scanners TTID

GT-10B-SU - 0.125 mm, USB, PS/2, 190 g, USB Interface The GT-10 scanner range takes maximum advantage of its performance features: versatility, long life and user friendliness.
CCD (Charged Coupled Device) technology:
- No moving parts.
- Particularly robust.

Excellent scanning performance:
- Long distance scanning in excess of 1 m thanks to CCD technology.
- Above-average reading speed of 2D codes (GT-10Q) and bar codes.
- Easy recognition of even damaged 2D code labels (GT-10Q).
- Scanning of broad bar codes.

Aiming beam mode (GT-10Q):
- 2D codes (laser beam).
- Bar codes (laser beam).
- Only reads the code envisaged by the beam.
- Simultaneous reading of different codes is possible — on demand up to four 2D codes can be read at once.

Impact resistance
- Increased protection due to new stronger casing and the use of rubber to improve impact protection (from max 2 m high).

Dust and splash proof to meet the IP54 standard.
- Water and dustproof even under rough working conditions.

Wide range of functions:
- Bar code comparison: determines if a scanned bar code matches a master bar code stored in the GT-10.
- Programmable data formatting: Easy configuration of the output data for all existing host systems.
- Check for wrong parts:
(1) A bar code is read from the shipping instructions and registered as the master code.
(2) A bar code from a product to be shipped is scanned and then compared with the master code so that it can be approved for shipping.
- Auto-sensing function: The auto-sensing function automatically begins scanning when it detects a label.
- Remote ON/OFF function: Scanning can be switched on and off using commands from a host computer.

One-touch user function:
- Two scanning possibilities:
(1) using Magic Key (on top of scanner)
(2) using trigger (inside of grip)
- Code differentiation: Once two different symbol records have been registered it is possible to switch from one to the other using the Magic Key — this prevents reading incorrect codes in multiple-read mode.
- ON/OFF function: The scanner is in standby mode when the Magic Key is off.

Transfer of selected characters
- The data to be transmitted (e.g. operation start codes) can be set beforehand when the Magic Key is on.

Retransmit scanned data
- Scanned data can be retransmitted when the Magic Key is on without the bar code having to be scanned again.

Simple set-up with intuitive software:
- Installation software included in scope of delivery.
- Easy parameter setting from a PC with the set-up software.
- Quick start programme: Printing and configuring bar codes with the aid of the special installation software — the GT-10 is ready immediately.