Design
| Display type |
LCD |
| Channels quantity |
4 |
| Control type |
Buttons |
| Built-in display |
Y |
Performance
| Clock function |
Y |
| Clock mode |
12h |
| Speed control range |
0 - 9990 RPM |
| RPM sensing |
Active |
Kaze Chrono - 4x Fan Channels, 0-9990 rpm range, 165g, Black
<b>Liquid Crystal Display</b>
The Kaze Chrono comes equiped with a large LCD-block-display easily visible from all angles. Background brightness is adjustable in 4 steps, allowing the user to set it according to his /her taste and surrounding environment.
<b>Spin Up Voltage</b>
The adjustable voltage range moves between 5 and 12 volts. As some fans, however, sometimes show a hard time to "get going", they are fed with 12 volts at start-up before settling at the desired, lower value. This function ensures a stable start-up procedure for all connected fans.
<b>Clock Display</b>
The integrated clock function always shows the actual time, as a back-up lithium button cell battery takes care of the "time -keeping" whenever the PC is turned off. This makes the Kaze Chrono an attractive addition especially for HTPCs.
<b>Alarm Function</b>
To prevent overheating, a flashing display combined with a piercing sound signalizes to the user fan failures and exceeding temperature of 75° Celsius.
<b>Power Feed Control</b>
Should the rotational speed of any fan be detected to be 0 for 10 seconds or longer, the power supply to the fan in question will automatically be cut for safety reasons. This minimzes the risk of damage to both the fan and the fan controller.
<b>Jumper Switch for Personal Settings</b>
The Kaze Chrono comes along with two jumper switches for personal settings - one for turning the speaker ON /OFF, the other one for choosing between Celsius and Fahrenheit display.
