151
fan speed controllers
. Can compare prices and technical specifications (Supported drive bays, Power connector, Display diagonal, Maximum power per channel, Touchscreen type, Cables included).
-
Product catalogs to browse
-
-
The fan control F4XT Aerocool regulated by up to four fans with 5.25 "- electricity and is installed in a 5.25" bay. The control of each fan is indiv
-
Touch 1000 - LCD - tylish "hair brushed" alum front panel w/ Diamond cutting.\n- Innovative "Touch" LCD technology.\n- Monitors and controls 4 sets o
-
Product catalogs to browse
-
-
Touch 2000 - LCD - Large LCD screen (2 x 5.25” bays).\n- Innovative "Touch" LCD technology- Stylish "hair brushed" alum front panel w/ Diamond cuttin
-
"Touch" fan control V12XT - Large LCD control\n- LCD backlight on/off\n- Switch between Celsius and Fahrenheit\n- Overheating alarm temperature warni
-
Fan Control Junior Speed control for 3 fans and 2 USB ports, Black Aluminium fan controller for 3.5" bay, provides manual speed control for 3 fans an
-
Digital Fan Controller with 6 Fan Channels and CAM Control, 3M Dual Lock, 30W Max., 94.2g, Black <b>INDIVIDUALLY CONTROLLED</b>\nNow with
- :
- Built-in display: N
- Channels quantity: 6
- Rated power: 30
-
Kaze Chrono - 4x Fan Channels, 0-9990 rpm range, 165g, Black <b>Liquid Crystal Display</b>\nThe Kaze Chrono comes equiped with a large LC
- :
- Built-in display: Y
- Channels quantity: 4
- Control type: Buttons
- Input voltage: 5 - 12
-
Recon Fan Controller, ABS Plastic, 13.335 cm (5.25 ") Take control of your system anywhere with the BitFenix Recon™ Fan Controller. This five c
- :
- Built-in display: Y
- Channels quantity: 5
- Control type: Sensor
-
Fan Mate 2 - 5V, 6W, 20g, Black Fan controller for adjusting the fan speed of a single fan according to user preference
- :
- Rated power: 6
-
F4XT - Touch Panel, Black, 2 x USB 2.0 - Controls 4 sets of fan speeds.\n- 3 Adjustable speeds: Low / Medium / High.\n- 2 x USB ports.\n- LED on / of
- :
- Channels quantity: 4
-
Recon Fan Controller, ABS Plastic, 13.335 cm (5.25 ") Take control of your system anywhere with the BitFenix Recon™ Fan Controller. This five c
- :
- Built-in display: Y
- Channels quantity: 5
- Control type: Sensor
-
F4XT - Touch Panel, Black, 2 x USB 2.0 - Controls 4 sets of fan speeds.\n- 3 Adjustable speeds: Low / Medium / High.\n- 2 x USB ports.\n- LED on / of
- :
- Channels quantity: 4
-
V12XT - 5.25" Touch Panel - Large LCD screen.\n- LCD backlight on/off.\n- Switch between Celsius and Fahrenheit.\n- Overheating alarm temperatur
- :
- Channels quantity: 4
-
F6XT - 6 Channel Fan Controller - Controls 6 sets of fan speeds.\n- 3 Adjustable speeds: Low / Medium / High.\n- Dual LED colors + LED off functions.
- :
- Channels quantity: 6
-
X-Vision - ABS, LCD, Black - Controls and monitors five sets of fan speeds and temperatures.\n- Switch between Celsius and Fahrenheit.\n- Overheating
- :
- Channels quantity: 5
-
Fan Control, 3x 4 pin, 8.89 cm (3.5 ") , Aluminium, 2x USB 3.0 - 3.5" brushed aluminium panel with three channel fan controller.\n- Brushed
- :
- Built-in display: N
- Channels quantity: 3
- Control type: Rotary
- Input voltage: 12
-
F6XT - 6 Channel Fan Controller - Controls 6 sets of fan speeds.\n- 3 Adjustable speeds: Low / Medium / High.\n- Dual LED colors + LED off functions.
- :
- Channels quantity: 6
-
KM06-BK, 4ch., 0 - 9900 rpm, 160g, Black The Kaze Master Flat is a fan control unit featuring some neat original functions making it a little differe
- :
- Channels quantity: 4
- Input voltage: 12
-
KM05-BK, 4ch., 0 - 9900 rpm, 215g, Black The Kaze Master II is the all-new fan controller priding itself with 4 new functions sized for the 5.25"
- :
- Channels quantity: 4
- Input voltage: 12
-
Mesh Designed Fan Controller, Five 30W Channels - Mesh design to camouflage with mesh facade\n- Five 30W Controls\n- Easy-to-use sliders\n\nSimplicit
- :
- Channels quantity: 5
- Rated power: 30
-
LED Illuminated Fan Controller, Six 50W Channels - Slider controls with matte rubber finish for a bold look\n- 50W per channel power to your fans\n-
- :
- Channels quantity: 6
- Rated power: 50
-
FC.TRIO - 5.25”, 3 fans 3 temperatures The FC.TRIO has a brushed aluminium panel and gives you control of three fans using temperature monitoring. De
- :
- Input voltage: 5/12
-
FC.SIX - 5.25”, 6 fans, DC 0-12V (±10%) The FC.SIX has a brushed aluminium panel and gives you control of six fans. Designed to accommodate six 30W f
- :
- Input voltage: 0-12
-
5 Channels, 13.335 cm (5.25 ") ODD, 30W, Black Simplicity and functionality at its best, NZXT’s Sentry Mesh Fan Controller stealthily accommodat
- :
- Channels quantity: 5
- Rated power: 30
-
X-Vision - ABS, LCD, Black - Controls and monitors five sets of fan speeds and temperatures.\n- Switch between Celsius and Fahrenheit.\n- Overheating
- :
- Channels quantity: 5
- Rated power: 8
-
aquaero 5 LT USB Fan-Controller The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed pa
- :
- Channels quantity: 4
- Input voltage: 12
-
Sentry LX, 13.335 cm (5.25 ") LCD, 8W, Black - Large dual 5.25" LCD screen\n- NZXT designed intuitive control, set and change fan speeds an
- :
- Channels quantity: 5
- Rated power: 8
-
High perfomance external aluminum fan controller - Intuitive Touch Screen LCD – Advanced, touch screen LCD displays temperatures in C/F, RPMs, along
- :
- Channels quantity: 5
- Rated power: 10
-
13.335 cm (5.25 ") BAY FAN CONTROLLER, 5 buttons, Control Knob - 5 fan channels.\n- Switch between Celsius and Fahrenheit.\n- Overheating alarm
- :
- Built-in display: Y
- Channels quantity: 5
- Control type: Buttons
- Control type: Rotary
-
10.16 cm (4 ") LCD, 1 x USB 2.0, 1 x Headphone out, 1 x Microphone in <b>Monitor and control, then rush into action</b>\n\nTo win, y
- :
- Built-in display: Y
-
6 Channel Fan Controller - 6 sets o Fan Speed Controller, Using 1 x 5.25 Bay./li>\n- Single Fan maximum current support to 0.6A, Total of 3A (36W)
- :
- Built-in display: N
- Channels quantity: 6
-
Fan Control 3.5" Are your fans too loud? Do they run on a high rotation speed even though this is not necessary? You can change this! Just insta
- :
- Built-in display: N
- Control type: Rotary
-
- Fan Speed Controller, support fan x 4, using one PCI space.\n- According to your fan, adjust the fan speed from 20% to 100% full speed.\n- Ex.1000R
- :
- Built-in display: N
-
8.89 cm (3.5 ") Fan Controller Touch, "Touch" LCD Display, 4x Fans, 1x USB3.0 & Card Reader: SD / MMC / T-Flash, White - Innovativ
- :
- Built-in display: Y
- Channels quantity: 4
- Control type: Touch
- Input voltage: 4.6 - 12.5
-
- Three Fan Speed Controller, support fan x 3, use 1 x PCI space.\n- According to your fan, adjust the fan speed to (H) High-100%，(M) Middle-80%，(L)
- :
- Built-in display: N
- Channels quantity: 3
-
LCM, 13.335 cm (5.25 ") , SATA, Black <b>Overclocking command center</b>\n- OC Panel - Overclocking Command Center\n- Subzero Sense
- :
- Built-in display: Y
- Channels quantity: 4
- Control type: Buttons
-
5.25”, 30W, Channels 6, Black Thermaltake Commander F6 RGB LCD Multi Fan Controller\nThermaltake has launched the new multi-fan controller – Commande
-
Sentry LX - LCD NZXT, a company built on realizing the dreams of gamers worldwide, is proud to announce the Sentry LX, a high-performance aluminum fa
-
18 LED, 3/4-pin, 6x 24 W, 13.335 cm (5.25 ") , 147 x 64 x 41 mm - For up to six fans with separately selectable fan speed control\n(slow 0-20%, mediu
-
5/12 V, SATA, 3 A/36 W, 4 channels, 0 - 9990 RPM, 0 - 100°C The new Kaze Master Flat II fan controller unit inherits the "flat" front from its' prede
-
LC-Power LC-CFC-2. Channels quantity: 12 channels, Colour of product: Black, Display diagonal: 13.3 cm (5.25"). RPM sensing: Active, Control mode: Au
-
Fan Speed Control, 700 mA AN SPEED CONTROL\nAdjust the RPM speed of your case fa
-
TR-5A Features:\n- Automatic / Manual Fan Speed Curve Control.\n- Hugh 5.25” LCD Display.\n- 4 sets of Fan Speed Detection.\n- 4 sets of Temperature
-
TR-5B Features:\n- Automatic / Manual Fan Speed Curve Control.\n- Hugh 5.25” LCD Display.\n- 4 sets of Fan Speed Detection.\n- 4 sets of Temperature
-
KS01-BK-3.5 - Kaze Server 3.5, DC Input: 5V / 12V, DC Output: 3.7V (±10%) ~ 12V (±10%), Number of Fan Control Channels: 2 (Max. 1A & max. 12W per Cha
-
Kaze Master Pro 5.25 can be controlled independently up to six fans from 3.7 (± 10%) to 12 (± 10%) volts. Six temperatures can be monitored in either
-
KM03-BK-3.5 - Kaze Master Pro 3.5, DC Input: 5V / 12V, DC Output: 3.7V (±10%) ~ 12V (±10%), Number of Fan Control Channels: 4 (Max. 1A & max. 12W per
-
Aqua Computer 53234. Channels quantity: 4 channels, Colour of product: Multicolour. Supported fan connector types: 4-pin connecto
- :
- Built-in display: N
- Channels quantity: 4
The key features of the aquaero 5 include:
· Programmable four channel fan controller
· Graphic LC display with backlight (except LT)
· USB 2.0 and aquabus interface
· Four fan outputs with current measurement
· Versatile control options
· Eight temperature sensor inputs
· Flow sensor input
· Universal IR receiver (except LT)
· Output for IR transmitter
· Three LED outputs
· Potential-free switch
· Two additional power outputs
· Extensive alarm options
· Acoustical alarm
· Speed signal output for status evaluation
· Expandable to a maximum of 10 fan channels
Several aqua computer products can be used to expand the functionality of the aquaero 5 Controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices.
In maximum configuration, the following devices can be connected to an aquaero 5 simultaneously:
Two aquastream XT pumps
Six poweradjust 2 controllers
One tubemeter
Two multiswitches
Power consumption without attached loads: aprrox. 1 Watt at 5 Volt
Scope of delivery:
- aquaero 5 XT controller
- aquaremote infrared remote control
- four temperature sensors, length approx. 70 cm
- one internal USB cable, length approx. 100 cm
- one connection cable for speed signal or aquabus
- manual
- mounting material for installation into a free extension bayThe aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype.
The key features of the aquaero 5 include:
- Programmable four channel fan controller
- Graphic LC display with backlight (except LT)
- USB 2.0 and aquabus interface
- Four fan outputs with current measurement
- Versatile control options
- Eight temperature sensor inputs
- Flow sensor input
- Universal IR receiver (except LT)
- Output for IR transmitter
- Three LED outputs
- Potential-free switch
- Two additional power outputs
- Extensive alarm options
- Acoustical alarm
- Speed signal output for status evaluation
- Expandable to a maximum of 10 fan channels
Several aqua computer products can be used to expand the functionality of the aquaero 5 Controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices.
In maximum configuration, the following devices can be connected to an aquaero 5 simultaneously:
Two aquastream XT pumps
Six poweradjust 2 controllers
One tubemeter
Two multiswitches
Power consumption without attached loads: aprrox. 1 Watt at 5 Volt
For a more thorough feature description, please click this link: aquaero_5_eng.pdf
Scope of delivery:
- aquaero 5 XT controller
- aquaremote infrared remote control
- four temperature sensors, length approx. 70 cm
- one internal USB cable, length approx. 100 cm
- one connection cable for speed signal or aquabus
- manual
- mounting material for installation into a free extension bay
- 2
- 1
- 4
- 29
- 8
- 1
- 9
- 1
- 4
- 4
- 1
- 1
- 1
- 3
- 1
- 3
- 5
- 2
- 11
- 2
- 11
- 1
- 2
- 17
- 1
- 5
- 2
- 3
- 8
- 1
- 1
- 6
-
Payment Methods
We accept:
