security device components

4-Channel RF Receiver, 152 m, 315 MHz, 135 x 100 x 28 mm Controls home automation functions, garage doors, alarm panels, etc., from up to 500ft (150m). Similar to SK-910RBQ & SK-910RB2Q except with 4 outputs, independently programmable. Compatible with all ENFORCER transmitters. Mode switch for easy programming. 4 LEDs, one per channel, indicate RF reception, learn mode, transmitter cleared, output type.
Add optional plug-in extended range antenna: SK-91ERSD.

- Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.
- Patented CODEBUMP anti-codegrabbing technology (requires use of CODEBUMP transmitter).
- Uses either fixed code (SK-919TD2A-U, SK-919TD1S-UP, SK-919T4J, SK-919T1H, SK-919T2H, or SK-919T4H) or code hopping (SK-917T2A-UQ, or SK-917T4J) transmitters with up to 500ft (150m) range using standard antenna.
- External extended range antenna optional. Plugs directly into receiver PC Board. If the SECO-LARM ENFORCER SK-91ERSD (Dipole Antenna) is used, range will be up to 1000ft (300m).
- 315MHz (433MHz - 433.92MHz - also available by request - SK-910R4-4Q)
- Mode switch for easy transmitter learning.
- Easily Code-learns up to 15 remotes per channel.
- Stores codes safely in EEPROM for up to one year in case of power loss.
- Four Form-C Dry Relay Contact (NO/NC/COM) Outputs. Each output rated 10 Amps at 24 VDC.

4 Separate Channels / 4 Output Modes Each:
- a. Timed Momentary (1, 2, 3, 4, 5, 10, 30, 60 sec.)
- b. Toggle (On/Off)
- c. Latch (Output stays on until manually reset)
- d. Continuous or Validity (Output for as long as signal is received)

All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)

Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.

Size: 5.31"x4.33"x1.1" (135x110x28 mm)

- Four LEDs (One LED for each channel) to indicate RF reception, learn mode entered, transmitted learned, memory cleared.
- Use to control the garage door, house lights, alarm control panel, or other functions that require momentary or shunt operation.
- In addition, these revolutionary receivers have:
- Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
- HIGHER SENSITIVITY for greater operating distances.
- UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
- GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.