Speaker sets Hercules

XPS 5.1 70 Slim - 70W RMS, 30 - 20000Hz, Black - 5.1 speaker system, featuring center speaker with flat panel screen mounting system and wooden subwoofer.
- Ultra-slim satellite speakers: their sleek, modern design fits in perfectly with any décor. Includes a very thin center speaker with flat panel mounting system - a bonus, compared to current market standards. Lacquer finish on backs of satellites.
- Total power: 70 watts RMS (4 x 7.5 W (satellites) & 1 x 15 W RMS (center), 1 x 25 watts RMS (subwoofer)). Peak power: 140 W
- Frequency response: 30Hz - 20kHz.
- Greater energy savings than market standards: special power supply uses less than 1 watt of power in standby mode.
- Magnetically shielded speakers won’t disturb your surroundings.

Multifunction remote control - practical and easy to use:

- Control knob with 3 functions: on/off, volume control and bass control. LED indicators for the different functions.
- Headphone jack and microphone input.
- Auxiliary line input.
- Virtual surround sound button (applied to stereo input).

5.1

System for transmitting sound over 6 channels, with 5 channels reproducing medium and high range frequencies and 1 channel reproducing bass frequencies.

Subwoofer

The subwoofer is a speaker which reproduces bass frequencies, and is often larger than other types of speakers as bass frequencies require larger membranes than is the case with high or medium frequencies. A single subwoofer is most often included in a speaker kit: as bass frequencies are transmitted all around the membrane (omnidirectionally) and not just in front of the membrane, a single subwoofer is sufficient to provide rich bass sound all across an area, as long as it is powerful enough. In a X.1 kit (2.1, 4.1, 5.1, 6.1 or 7.1), the digit after the period, i.e. the 1, signifies that 1 subwoofer is included.

Watts Peak Power

Watts Peak Power represents the peak electrical power delivered by an amplifier to speakers.

Watts RMS

Power in Watts RMS represents the continuous electrical power delivered by an amplifier to speakers.

Satellite

Satellite is the name given to a speaker which does not reproduce bass frequencies: this speaker is therefore the satellite to a subwoofer. In a X.1 kit (2.1, 4.1, 5.1 , 6.1 or 7.1), the digit before the point 1, i.e. the 2, 4, 5, 6 or 7, represents the number of satellites in the speaker kit.

Magnetic shielding

Magnetic shielding shields against the magnetic field generated by speakers, for example. If a speaker is touching a CRT screen (television or computer), magnetic shielding is necessary to avoid disturbing the display.

Microphone input

An analog plug to which a microphone is connected: microphone inputs may be in 6.35mm jack (1/4’’ jack), 3.5mm jack (1/8’’ jack) or XLR formats.

Headphone plug

Stereo audio output allowing for the connection of stereo headphones. A headphone plug uses a connector in 3.5mm mini-jack format.

Line input

Analog audio input designed to receive an unamplified sound signal. There are 2 line levels: the general public line level, at -10dBv: this is the signal output level of a Hi-Fi component connected to an amplifier via a connector known as a line input. The professional line level, at +4dBu, is much more powerful, and is used to connect studio or public-address (PA) equipment.