Features
| Isolation |
0.5 kV |
| Wire clamp type |
Cage clamp |
| Switching frequency (max) |
100 kHz |
| Conductor area (min) |
0.08 mm² |
| Conductor area (max) |
2.5 mm² |
| Signal voltage (1) |
15 - 30 V |
| Signal voltage (0) |
-3 - 5 V |
| Fire load |
1.488 MJ |
| Vibration resistant |
Y |
| AWG wire size (max) |
14 |
| Number of outputs |
2 outputs |
| Shock resistant |
Y |
| AWG wire size (min) |
28 |
| Short circuit protection |
Y |
Power
| Current consumption (internal) |
70 mA |
Peak Time Counter, DC 24 V
The counter acquires 24V binary pulses over a defined time period (gate time) and transports the counter status to the installed bus system.
The U/D input allows either Up or Down counting.
Digital outputs DO 1 and DO 2 can be set using the control byte.
The control byte sets or resets the counter.
A counter lock-out is also possible.