Features
| Wire clamp type |
Cage clamp |
| Internal bit width |
32 bit |
| Switching frequency (max) |
100 kHz |
| Conductor area (min) |
0.08 mm² |
| Conductor area (max) |
2.5 mm² |
| Signal voltage (1) |
15 - 30 V |
| Signal voltage (0) |
-3 - 5 V |
| Vibration resistant |
Y |
| AWG wire size (max) |
14 |
| Number of outputs |
2 outputs |
| Shock resistant |
Y |
| AWG wire size (min) |
28 |
| Isolation |
0.5 kV |
Power
| Current consumption (internal) |
70 mA |
Up/Down Counter; Switching Output, 24 V
The counter acquires 24V binary pulses and transports the counter status to the installed bus system.
The U/D input allows either Up or Down counting.
Digital outputs DO 1 and DO 2 can be activated based on the counter level or using the control byte.
The control byte sets or resets the counter.
A counter lock-out is also possible.