SAT-TV-Empfang

2 x 50 Watt Stereo Power Amplifier, DTP 330 - Integrates HDMI, RGB, and audio sources into presentation systems
- One DTP input, three HDMI inputs, and two RGB inputs
- Selectable HDMI or DTP output
- Integrated DTP input and output support transmission of video, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable
- Available with energy efficient Class D stereo or mono amplifier:
- 2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
- 1 x 100 watts @ 70 volts

The Extron MPS 602 is a simple-to-use, six input media presentation switcher for digital and analog sources. It offers digital video switching with three HDMI inputs and one DTP® twisted pair input, and analog video switching with two RGB inputs that are digitized for distribution to the digital outputs. For increased flexibility, the MPS 602 includes a DTP twisted pair output and an HDMI output that are switch-selectable. The DTP input and output work in conjunction with DTP transmitters and receivers to extend video, audio, and bidirectional control signals up to 330 feet (100 meters), and each DTP link requires just a single shielded CATx cable. The MPS 602 also includes several audio switching and processing features, available power amplification, plus flexible control options for complete AV switching and distribution.

Integrated Digital Twisted Pair Extension
The DTP twisted pair input on the MPS 602 can receive signals from a remote DTP 230 or DTP 330 transmitter in areas such as a conference table, lectern, or wall for connecting a guest laptop. The DTP twisted pair output can be used to transmit digital AV signals from an MPS 602 in a rack to a DTP 230 or DTP 330 receiver behind a flat-panel display on a wall, above a ceiling‑mounted projector, or any other remote location. DTP 230 and DTP 330 transmitters and receivers are available in compact, low‑profile enclosures, plus Decora® wallplate and floor box versions to suit the installation requirements of a specific application.

The DTP twisted pair input and output include additional convenient, integrator-friendly features designed to help simplify installation. Bidirectional RS‑232 and IR signals can be inserted from a control system and transmitted over the single shielded CATx cable together with the video and audio, enabling control of a source or display. Additionally, the MPS 602 can send power to select DTP transmitters and receivers over the same shielded CATx cable, streamlining system design and installation.

Reliable Switching for Digital and Analog Formats
The MPS 602 features a unique independent switching capability for digital and analog RGB video sources. The MPS 602 digitizes analog RGB input signals to ensure that a reliable, high quality digital video signal is sent to the HDMI and DTP outputs. The RGB inputs can be switched independently to the local RGB output.

To enhance and simplify integration of sources and displays, and to help ensure optimal system performance and dependability, the MPS 602 features EDID Minder®. EDID Minder is an Extron-exclusive technology that manages EDID communication between the display device and input sources to ensure that the correct video formats are displayed reliably.

Audio Integration Capabilities with Available Power Amplification
The MPS 602 includes six‑input analog audio switching, a mic/line input with 48 volt phantom power, HDMI audio embedding and de‑embedding, and several audio processing features for mixing and ducking. The mic ducking feature automatically reduces program audio when it detects a microphone signal, replacing the need for a separate audio ducking processor. To streamline audio setup, the MPS 602 features front panel mic and program audio output volume controls which allow for independent adjustment of mic volume, program audio volume, and muting. Audio configuration features and options can be easily accessed using the Product Configuration Software, with an intuitive GUI that provides access to all available adjustments and settings.

The MPS 602 is available in three models, two of which feature integrated power amplifiers. The MPS 602 is a non‑amplified model with a variable preamp output. The MPS 602 SA delivers stereo power amplification with 50 watts rms per channel into 4 ohms and 25 watts rms per channel into 8 ohms, while the MPS 602 MA provides mono 70 volt amplification with 100 watts rms output. Both of the amplified models feature an Extron exclusive Class D amplifier design with patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform as well as an improvement in signal fidelity over conventional Class D amplifier designs.

Multiple Options for Control and Operation
The MPS 602 features front panel controls for direct input switching, as well as mic and program audio volume adjustment. It also features automatic switching between inputs to streamline system operation when the unit is installed in locations such as a lectern or under a conference table. Remote configuration and control are available via USB and RS‑232. Housed in a 1U, full rack width metal enclosure, the MPS 602 can be easily integrated into many environments.

- Integrates HDMI, RGB, and audio sources into presentation systems
- Inputs: Three HDMI, one DTP® twisted pair input on RJ‑45, two RGB video on 15‑pin HD, five stereo balanced/unbalanced audio inputs on captive screw, one mic/line audio input on captive screw
- Outputs: One selectable DTP twisted pair output on RJ‑45 or HDMI output, one RGB video on 15-pin HD, one fixed audio output on captive screw, one variable stereo audio output on captive screw, speaker outputs on 5 mm, 4‑pole captive screw connector - MPS 602 SA or on 5 mm, 2‑pole captive screw connector - MPS 602 MA
- One DTP input, three HDMI inputs, and two RGB inputs — The MPS 602 allows for switching between HDMI and analog video sources.
- Selectable HDMI or DTP output — The input signal can be routed to either the HDMI output or the DTP output.
- Independent RGB input switching — Allows independent switching of RGB inputs to the local RGB output.
- Integrated DTP input and output support transmission of video, control, and analog audio up to 330 feet (100 meters) over a shielded CATx cable — Supports digital signal transmission of HDMI, DisplayPort, DVI, 3G‑SDI, or VGA plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable, providing high reliability and maximum performance on an easily installed cable infrastructure.
- Supports computer and video resolutions up to 1920x1200, including 1080p/60 and 2K — The MPS 602 supports digital signal transmission up to 330 feet (100 meters) over a shielded twisted pair cable and maintains superior image quality at the highest resolutions.
- Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
- Compatible with CATx shielded twisted pair cable — The MPS 602 fully supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
- Bidirectional RS‑232 and IR pass‑through for AV device control — Bidirectional RS‑232 control and IR signals can be transmitted alongside the video signal over DTP connections, allowing the remote device to be controlled without the need for additional cabling. Bidirectional control extension eliminates the need for control system wiring to remote devices.
- Remote powering of select DTP transmitters and receivers — The MPS 602 can provide power to select DTP transmitters and DTP receivers over the twisted pair connections, eliminating the need for separate power supplies at the remote units.
- Compatible with all DTP Series models and DTP‑enabled products — Enables mixing and matching with desktop and wallplate transmitters and receivers, as well as other DTP‑enabled products to meet application requirements.
- Digital conversion of analog input signals — Analog signals are digitized, ensuring that a reliable, high quality digital video signal is sent to the output destination.
- HDCP compliant — Fully supports HDCP‑encrypted sources, with selectable authorization for unencrypted content.
- Supported HDMI specification features include data rates up to 6.75 Gbps, 3D, and HD lossless audio formats
- EDID Minder® automatically manages EDID communication between connected devices — EDID Minder ensures that all sources power up properly and reliably output content for display.
- Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing continuous communication between source and display.
- HDMI audio embedding — Analog input audio signals can be embedded onto the HDMI output signal.
- HDMI audio de‑embedding — Embedded HDMI two‑channel PCM audio can be extracted to the analog outputs.
- Mic/line input with 48 volt phantom power — A mic or line level audio source can be mixed with program audio. Selectable 48 volt phantom power allows the use of condenser microphones.
- Mic ducking — Automatically reduces program audio when a microphone signal is detected, replacing the need for a separate audio ducking processor.
- Audio breakaway — Provides the capability to break an analog audio signal away from its corresponding video signal and route to the audio outputs, allowing the analog audio channels to be operated as a separate switcher.
- Output volume control — The MPS 602 provides volume control and muting for the program and amplified audio outputs, as well as a separate control for mic volume and muting.
- Available with energy efficient Class D stereo or mono amplifier:
- 2 x 50 watts @ 4 ohms; 2 x 25 watts @ 8 ohms
- 1 x 100 watts @ 70 volts — The MPS 602 SA offers a stereo power amplifier with 50 watts per channel into 4 ohms and 25 watts per channel into 8 ohms, while the MPS 602 MA offers a mono 70 volt power amplifier with 100 watts rms output. Both feature an Extron exclusive, highly efficient, advanced Class D amplifier design with CDRS™ - Class D Ripple Suppression, an Extron patented technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifier designs. CDRS eliminates the high frequency switching ripple characteristic of Class D amplifiers, a source of RF emissions which can interfere with sensitive AV equipment such as wireless microphones.
- Auto‑switching between inputs — Auto-switching allows for simple, unmanaged installation in locations such as in a lectern or under a conference table. When multiple inputs are active, the switching priority is configurable.
- Output muting control — The video and audio output may be muted independently.
- Front panel security lockout — This feature locks out either all front panel functions, or mic volume and muting; all functions however, are available through USB or RS‑232 control.
- RS‑232 control port — Enables the use of serial commands for complete control and configuration via the Extron Windows®-based control program, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII commands that allow for quick and easy programming.
- Front panel USB configuration port — Enables easy configuration without having to access the rear panel.
- RJ‑45 signal and link LED indicators for DTP ports — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
- New JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.
- Easy setup and commissioning with Extron's PCS - Product Configuration Software — Conveniently configure multiple products using a single software application.
- Rack‑mountable 1U, full rack width metal enclosure
- Includes LockIt® HDMI cable lacing brackets
- Highly reliable, energy‑efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.