Video Servers/Encoders Sony

NSR1200, 480 fps, MPEG-4 / JPEG, 2000 GB, 2 x HDMI, 3 x D-Sub The NSR-1200 has a physical storage capacity of 2TB. It supports both legacy analog and network cameras, supports both full HD/SD cameras/displays, and has an open-platform design with and ease of setup and operation. The NSR-1200 supports up to 64 units of analog/network cameras in total. With the optional NSBK-A16, up to 16 analog cameras can be connected. The NSR-1200 can also be used with up to seven units of the optional NSRE-S200 (2 TB Hard Disk Storage Device), allowing for the addition of 14GB storage capacity. With the NSR-1200, you can open the door to a world of new possibilities in video surveillance.

Highlights:
- Hybrid recording (Analog/IP, SD/HD)
- Open platform (Supports IP cameras of some other brands)
- Easy setup and intuitive operation
- Max. 64 cameras supported (IP/Analog total)
- Max. 16 analog cameras connection (with an optional NSBK-A16)
- 2 TB Physical Storage Capacity
- RAID 5
- HDMI outputs for Full HD displays
- Supports megapixel cameras
- Additional storage of optional NSRE-S200 (2 TB) x 7 units
- Remote viewing by controller software (supplied)
- Light Funnel Control
- Flexible user management

Hybrid System

Easy to migrate from analog to IP camera systems
Up to 16 analog cameras can be connected to the NSR-1200, using the NSBK-A16 Analog Encoder Kit. You can simply add network cameras, including megapixel cameras, while maintaining your analog cameras.

Easy to migrate to large-screen HDTV display systems
The NSR-1200 has two analog RGB and two HDMI monitor output connectors on the rear panel. You can use two out of the four outputs simultaneously in any combination to meet your system requirements.

Easy to migrate into HD camera systems
To answer to the growing demands for HD (High Definition) network cameras, the NSR-1200 will offer this capability in the near future.

Open Platform

Free to select from a wide range of cameras
The NSR-1200 can be used not only with Sony network cameras but also with other major brand network cameras.

Quick Setup & Easy Operation

Quick setup
With the set-up wizard, you can set up the system in a simple manner. With Sony's IP cameras, the NSR-1200 detects the cameras instantly, which drastically reduces the time required for the system installation. Images from cameras are assigned to Monitor Layout automatically so that you can start monitoring instantly.

Intuitive graphical user interface
You can search, preview, and play back the recorded video with an intuitive user interface.

High Reliability

RAID drives
The NSR-1200 employs RAID 5 to save the system in the event of an HDD failure.

UPS
The NSR-1200 can be used with Uninterruptible Power Supply (UPS) equipment via the RS-232C port, protecting in the event of accidental power failure.

High Picture Quality

High frame rate display
You can view and monitor video via the HDMI interface with Full HD (1920 x 1080) displays. If you use megapixel cameras, you can view the full resolution image with such equipment. What's more, you can set a 6-screen display layout and still view VGA video in full resolution.

With Sony IP Cameras

MPEG4/JPEG dual stream
Connected with the SNC-RX Series, SNC-DS10, SNC-DM110, and later models from Sony, the NSR-1200 can accept both JPEG and MPEG4 from the cameras at the same time. With a limited storage capacity, for example, you can monitor live video via JPEG at frame rates as high as 30 fps, and record video via MPEG4 at frame rates as low as 5 fps.

DEPA
Both the NSR & IMZ Series incorporate DEPA - Sony's Distributed Enhanced Processing Architecture. Used in conjunction with DEPA-enabled network cameras from Sony (SNC-RX Series, SNC-RZ50, SNC-CS50, and later models), DEPA helps identify critical events more easily, and provides a streamlined workflow for your video security operations.

Expandability and Flexibility

Additional storage of 2 TB x 7
The NSR-1200 has an internal storage of up to 2 TB/1 TB/0.5 TB respectively. Each can be connected with up to seven units of the NSRE-S200 (2 TB Hard Disk Storage Device).With the NSR-1200 in RAID 5 configuration and the seven units of the NSRE-S200, the maximum recording capacity will be 11 TB (approx.) in total.

Remote viewing by controller software
If you install the bundled Controller Software to a personal computer in a remote location, you can supervise the NSR-1200 recording servers simultaneously in various locations, with flexibility in selecting and viewing live and recorded images.

IMZ-NS100 Series
In the same series of software solution, Sony also provides the IMZ-NS101/ NS104/ NS109/NS116/ NS132 Intelligent Monitoring Software. This can be installed on your own Microsoft (R) Windows (R) server to monitor and control 1/4/9/16/32 network cameras, respectively. It features the same functionality and graphical user interface as the NSR-1000 Series. The supplied Controller Software can be used for the multiple NSR-1000 Series and IMZ-NS100 Series.

Flexible user management
All access is managed by user authorization, which is set by the system administrator. The administrator can simply provide a user with the prepared five levels of operational permission, or the administrator can give a user different permission levels for different accessible cameras/servers.

Other Features
- Playback While Monitoring Live Images
- Camera PTZ Control
- Light Funnel Control
- Multiple Hot-Spot Monitoring
- Manual, Scheduled, Alarm/Event, and Pre-alarm Recording
- Privacy Zone Masking
- Audio Recording, Monitoring, and Playback
- File Export to CD-R, DVD-R, and USB Flash Memory