Uninterruptible power supplies (UPSs) AEG

Protect D.1500 BP, 1500 VA, 1350 W, USB, RS-232, 6x IEC320 C13, 45dB, 28kg PROTECT D.
You expect a technically convincing solution, with the flexibility to adapt to ever increasing requirements. Easy to operate and designed for easy maintenance.

HIGH EFFICIENCY
The Protect D. achieves more than 20% higher power in comparison to conventional uninterruptible power systems, due to it‘s new power factor rating of 0.9 lagging across it‘s operating range. Through careful component selection our UPS can provide outstanding performance, superior reliability and longer autonomy times.The reliable AEG electronics enables universal operation across the whole apparent and effective power range without loss of power, allowing the inverter to handle even very complex loads.
Continuous improvements in the efficiency of our double conversion, ECO and ECO+ modes is really evident when power consumption lowers, lowering the need for cooling
and decreases the overall operating expense.

COMPACT DESIGN
UPS electronic and battery are combined in only 2U of rack space. With the flip-over front cover it is easy to change the hot-swappable battery or to add external battery packs.
Autonomy time can be extended by preconfigured battery packs. The number of connected battery packs will be detected automatically. All battery packs are hot-swappable and can be connected without disconnecting the UPS, simply open the cover to swap.

COMMUNICATION OPTIONS
Extraordinary communication options are provided by the several interfaces including programmable potential-free contacts, emergency power off switch, RS232, USB and an extention slot that can be used in parallel mode with RS232/USB. The extention slot is compatible with optional accessories such as relay cards or SNMP adapter.

BATTERY MANAGEMENT
The improved battery charging technology provides quicker charging time with a gentle charging characteristic. The battery management system is able to differentiate between initialization during setup, the battery charging phase (temperature compensated) and the standby phase. This enables the system to extend battery lifetime as there is a decrease of pole corrosion. An uncoupled battery charger avoids battery heating and inverter reflection effects.

INNOVATIVE OUTPUT CONTROL
All UPS outlets are equiped with an innovative lock mechanism that prevents the connected cables from accidental disconnection. The UPS outlets can be managed by the user, allowing applications to be prioritized in the event of a power failure. These programmable outlets allow for easy load management or load shedding, enabling the user full flexibility in power distribution and energy management.

GRAPHICAL DISPLAY
The multi-language graphical display supports better read-ability. It displays several parameters of the input, UPS mode and the output. Three LEDs at the top of the display indicate the current operating mode. From the control panel the user is able to configure the UPS setting and activate an audible alarm. All events are logged by an internal logger to allow events analysis. From the settings menu the user can control the UPS outputs according to the battery capacity and the delay after a power failure for the UPS to initialize a shut down. It is also possible to schedule for e.g. a battery test either daily, weekly or monthly.

ADDITIONAL FEATURES
With the converter mode the UPS can be used as frequency converter or works as a line conditioner with an effective output voltage of 200V or 208V.